At present, the packing belt on the market can be divided into many types such as pure polypropylene, polypropylene plus masterbatch and polypropylene plus recycled materials, so the packaging belt manufacturers prompt us to pay attention to its quality problems. When using strapping belts, mastering reasonable replacement methods can effectively save our working time. The following packaging manufacturers will introduce us to the relevant replacement knowledge. When using strapping, it should be removed when the straps are still able to hit 2-3 packs. This will help us not to waste time when replacing new straps. After replacing the new straps, wear them in the normal order and kick off the remaining straps. After the replacement of the new straps, there will be loose and uneven phenomenon. At this time, we should adjust the tightening button in time until it is adjusted to meet the process standards. For the quality of the packing tape, it depends on the high purity of the packing polypropylene. From the first straps made from straw ropes, to the now environmentally friendly transparent straps, the packaging tapes made from pure polypropylene are completely transparent, and the packaging tapes produced from polypropylene plus masterbatch will be translucent. The straps produced with recycled materials are essentially opaque, whereas the straps produced with polypropylene plus masterbatch and recycled materials are completely opaque. In the adjustment, we must take good care of it. If it is too tight, it will not be able to reach the belt. If it is too loose and does not meet the requirements of the process, we will only be able to guarantee the normal working of the packing belt if we meet our process standards. More packaging information can be on China's packing belt trading network Dress For Festival,Festivals Clothings,Festival Wear,Steel Printing Tshirt Yangzhou Youju E-commerce Co.,Ltd , https://www.yzxygarments.com