[China Glass Net] The frameless glass door is distinguished from the larger features of ordinary doors such as aluminum alloy doors and plastic steel doors. It is a frame with no consolidation around its door leaf (glass). Frameless glass doors are almost completely transparent, so they have good daylighting properties and can be used in any combination. Generally used in shopping malls, hotels, offices and other places. In recent years there have also families installed in villas. Many people are not sure about the material requirements for installation, main equipment, working conditions, and quality standards when choosing a frameless glass door. Now Xiaobian summarizes some of the preliminary work on the installation of frameless glass doors. Bikini Tops,Cute Bikini Tops,Cheap Bikini Tops,Womens Bikini Tops Shaoxing Concord Textile Co., Ltd. , https://www.concordtex.com
First, the material requirements are the material requirements. 1. The model specifications of the glass door should meet the design requirements, the hardware accessories are complete, and there is a factory certificate. 2, the fixed glass plate must be the same thickness as the glass door, and must meet the design requirements, there is a factory certificate. 3. Auxiliary materials, sealants, multi-functional adhesives, etc. shall comply with the design requirements and relevant standards.
Second, the main equipment equipment is followed by tool requirements. The following tools are required for the installation of frameless glass doors: hand grinders, glass knives, sealant injection guns, glass suction cups, fine grinding wheels, rulers, screwdrivers, and hanging pendants. There are also safety precautions.
Third, the operating conditions are good after the tools and materials are, is the operating conditions. 1. The finish of the wall and the ground has been completed, the site has been cleaned up, and the experience has passed. 2. The stainless steel or other finish of the door frame has been completed, and the limit groove for mounting the fixed glass plate at the top of the door frame has been reserved. 3. Fix the wooden bottom of the fixed thick glass with nails or multi-purpose glue on the ground, then put a wooden strip on the side of the wooden top to fix the glass plate, and then use the multi-purpose glue to Side stainless steel or other finishes are glued to the wooden bottom bracket, and the aluminum alloy square tube can be fixed on the anticorrosive wood brick buried under the ground with wood screws. 4. Install the floor spring and positioning pin for opening and closing the movable door leaf on the ground reserved position and the beam of the door frame according to the design requirements. 5. Three sizes are taken from the upper, middle and lower parts of the mounting position of the fixed glass plate, and the smaller size is the cutting size of the glass plate. If the upper, middle and lower dimensions are the same, the cutting width should be less than the measured size of 2mm and the height should be less than the measured size of 4mm. After the glass plate is cut, it should be chamfered at the periphery, and the chamfer width is 2mm.
Fourth, the quality standards 1, the main control project (1), glass doors and their accessories must comply with the design and related standards. (2) The position and opening direction of the glass door installation must meet the design requirements. (3) The installation of the glass door frame and the limit groove of the fixed glass on the top of the door frame and the bottom of the ground fixed glass plate must be firm. 2. General items (1), the fixed glass plate of the glass door must be installed firmly, and the joints are smooth and smooth. (2) The spring door leaf of the glass door is automatically positioned, the opening angle is 90°±3°, and the closing time is within the range of 6∽10S. (3), the glass door should be installed with complete accessories, the installation position is correct, firm, flexible and applicable, to achieve their respective functions, and the appearance is beautiful. (4) The joint between the fixed glass and the door frame, the wall and the limit groove, and the wooden bottom support must be filled with glass sealant to be full and compact, and the surface is smooth, smooth and free of cracks. (5) The appearance of the glass door should be clean and free of scratches and bumps;
Permissible deviation item No. Item Allowable deviation (mm) Inspection method 1 Activity door fan hole diagonal difference 3 Inspection with steel tape measure 2 Door fan to mouth seam closure When leveling 1 With depth rule inspection 3 Fixing glass to seam leveling 1 Using depth gauge inspection 4 Fixed glass butt joints 3 Check the construction of 5 door fans and fixed glass or door and glass doors with a wedge feeler.
I don't know if you understand it? Is it very simple?