Nowadays, many newcomers choose to buy loose diamonds for inlaying. When buying diamond jewelry, many people know how to measure diamond quality from 4c, 4c is carat, cut, color and clarity. (clarity). However, a high-quality diamond must be matched with sophisticated mosaic technology to complement each other. In fact, the good mosaic method is more representative of the most embarrassing side of the diamond, conveying the most touching emotions of the diamond. The following is a brief introduction to several popular diamond mosaic methods.
Christmas Sack Christmas Sack,Personalised Christmas Sack,Large Christmas Sacks,Kids Christmas Sacks Shangyi Home Products Co., Ltd. , https://www.shangyi-group.com
First, the groove set (track setting) ChannelSetting
It is a method of first pulling out a groove on a precious metal bracket and then clamping the diamond into the groove. The track setting method is applicable to diamonds of the same diameter, one after the other, which are continuously embedded in the metal track, and the metal is supported by the two sides. This mosaic method can make the surface of the decoration look smooth.
Tips: This is a safer way to use the ring in a ring full of small diamonds.
Second, the common tooth set CommonProngSetting
The two diamonds adjacent to each other share two teeth, reducing the number of teeth, making the diamond more compact, feeling no gaps, and looking simpler. But the requirements for mosaic are even higher.
Tips: This kind of setting method, almost no metal is seen from the surface, and the process is very demanding.
White 18K Gold Diamond Ring - Sweet
Three, claw setting ProngSetting
Claw setting: The longest metal claw (column) is used to hold the diamond tightly. The biggest advantage is that the metal rarely blocks the diamond, clearly showing the beauty of the diamond, and the light is incident and reflected at different angles, making the diamond look more Big and even. It is currently a popular monolithic diamond style on the market. The claw setting can be generally divided into a six-prong setting, a four-prong setting, and a three-prong setting. Nowadays, the wedding diamond ring is popular with the six-claw crown. The princess diamond can be set with four-prong setting. The large diamond also takes two small claws and forms a claw.
Tips: This kind of inlaid drill is relatively strong, of course, except for the 2 claws (this famous easy to drop), especially the four-claw, stable and less drilled. If you must say the shortcomings, this mosaic method has more diamonds than the setting, and some MM may not like it, and it costs more metal. In addition, try to choose the round claws when you choose, to avoid hooking the sweater and hair, causing the claws to deform and pull the diamonds off when pulling.
Fourth, nail setting (pinch setting) PaveSetting
On the edge of the metal material, use a tool to shovel out a few small nails to fix the diamond. The metal or claws of the fixed diamond are not visible on the surface, and the closely arranged diamonds are actually placed in the metal gutter. Because there is no metal surrounding, the diamond can penetrate and reflect more light, highlighting the brilliant brilliance of the diamond.
Tips: Styles that are arranged with metal short sticks and small diamonds. If the column is used in a large area, it is not suitable for changing the ring size, otherwise it is easy to drop the drill.
G750 white gold diamond ring - sweet love
Five, forced inlay (card set) BarChannelSetting
The use of metal tension to fix the waist or waist and bottom of the diamond is a more fashionable style. The bareness of the diamond is even further than the claw setting, sparkling with brilliance.
Tips: The popular card set and V-shaped clips all belong to this category. Simply put, a shallow groove is formed on each side of the metal to insert the waist of the diamond. This kind of practice is very demanding on the process, and it is easy to drop the drill, especially the ring that needs to change the hand, try not to choose this style. However, it is more economical.
Six, buried inlay (stamped or aperture set) Mounting
Do not use the tooth hole to directly punch the metal, punch out the slot at the hole, embed the diamond, and then wrap the surrounding metal around its edge, and a circle of metal ring appears to visually enlarge the diamond. This kind of setting is very difficult. The diamond table top and the surrounding metal are on the same plane. It is also required that the metal support has a certain thickness, and the whole diamond can be buried inside, and the bottom of the pavilion cannot be exposed. The jewellery set in this way is stable and generous. Many small diamonds on the wedding ring are made with this kind of setting and are very comfortable to wear.
Tips: The diamond is buried in the setting, and is flat with the setting surface. In this way, once the metal is saved, the diamond is safer, it is not easy to hook and it is not easy to touch, but the diamond will be partially covered.
In addition to selecting styles, everyone needs to pay attention to:
1. Is the diamond safe?
2. Is it suitable to change the hand size?
3. The cost of metal.
In this way, we should be able to choose our own diamond ring style more scientifically. Also buy a finished ring MM can also refer to it.
Seven, set BezelSetting
The metal waist is used to seal the waist of the diamond below the metal bracket (rack), and the solid metal is used to prevent the diamond from falling off. This is the strongest and most traditional setting, showing the light of the diamonds, the radiance and restraint, and the peace and dignity. Care should be taken when purchasing diamonds in the package. The tip of the diamond should not expose the bracket, otherwise it will damage the skin or hurt the diamond.
Tips: Like the frame of the photo, the diamond is wrapped in the metal support below the waist. This kind of mosaic is also classic, but it costs less metal, but the size of the diamond is higher. In fact, this method should also be very strong, and it does not hook hair sweaters, but some merchants on the market now have problems with the practice. In order not to cover the diamonds, there are few parts to be wrapped, so there is a problem of falling diamonds. It is.
Christmas Sack, a big bag, you could load a lot of gift into it. it is favorite things for kids.
On our online store ,all kind of theme ,style, all product is made of high fabric, accessories is handmade.
On christmas day, using this christmas item to decorate your christmas party , it is better than others.
We also provide exclusive design for all customer, we very happy to develop partnership relation with good buyers, we will try our best to work and support, welcome to contact us.